Parallel, Serial, IDE & SATA Adapters
-
StarTech SSD to SATA Expansion Slot Mounted Adapter- Maximize system speed by adding SSD performance
- Wide installation compatibility with the included low-profile, and full-profile expansion slot brackets
- Get the most out of your SSD with support for SATA III, achieving transfer speeds up to 6 Gbps
- Add SSD performance to any desktop computer system by converting M.2 to SATA
- Optimize performance with support for SATA III transfer speeds, up to 6 Gbps
UR Code 173005| MPN S32M2NGFFPEX£17.36Availability: In Stock
-
Startech SATA to mSATA SSD Adapter- Connect an mSATA SSD to any standard SATA port
- Port Mounted SATA to Mini SATA converter card / 7-Pin SATA to mSATA adapter with no mounting bay or additional hardware required
- Storage adapter / Connect an mSATA SSD to an ITX computer systems that does not have an mSATA port
- Supports SATA I/II/III / Harness the speed of upgrading to a faster drive by connecting an mSATA SSD to any SATA-enabled computer
- Supports all drive capacities / Supports mini SATA (full-size)
UR Code 173310| MPN SAT32MSATM£16.60Availability: In Stock
-
Startech Mini SATA to SATA Converter Card Adapter- Turn an mSATA host connection into a standard SATA port
- mSATA to SATA HDD / SSD Adapter
- Storage adapter improves system capacity by enabling an mSATA port to host a larger SATA hard drive
- Mini SATA to SATA converter card supports SATA I/II/III (up to 6 Gbps)
- Tested with drives of up to 4TB capacity / Supports all drive heights
UR Code 173311| MPN MSAT2SAT3£12.47Availability: In Stock
-
StarTech 40 Pin IDE PATA to SATA Adapter- Blu-ray, DVD and CD-ROM drive compatibility with ODD (Optical Disk Drive) support, from an IDE host connection
- Hassle-free installation, with no software CD required
- Backed by a StarTech.com 2 year warranty and free lifetime technical support
- Connect a SATA device to an IDE/ATA motherboard or controller card
- Complete hardware solution; no software required
UR Code 173443| MPN IDE2SAT2£15.75Availability: In Stock
-
StarTech.com 2 Port PCI Express / PCI-e Parallel Adapter Card - IEEE 1284 with Low Profile Bracket- Supports Standard Parallel Port(SPP)
- Enhanced Parallel Port(EPP)
- ...
- Data transfer rate up to 1.5 Mbps
- Standard and low-profile brackets included
UR Code 173665| MPN PEX2PECP2£46.10Availability: In Stock
-
StarTech.com 4 Port Native PCI Express RS232 Serial Adapter Card with 16550 UART- Four high speed RS232 serial ports
- with support for data transfer...
- 256-byte deep FIFO per transmitter and receiver
- Native single-Chip
- single lane PCI Express
UR Code 174058| MPN PEX4S553£70.47Availability: In Stock
-
StarTech.com 2 Port RS232/422/485 PCI Serial Adapter w/ ESD- Supports RS232
- RS422
- RS485 2 wire
- and RS485 4 wire modes
- Each port can be set independently
- Built-in ESD (Electro-Static Discharge) protection
UR Code 174326| MPN PCI2S232485I£103.67Availability: In Stock
-
StarTech.com 1 Port Low Profile Native PCI Express Serial Card w/ 16950- High Performance Single Channel Oxford 950 UART
- Less load on the CPU (Up to 48% Less)
- Native single-Chip
- single lane PCI Express
- Equipped with a low profile bracket for PnP support for Micro and...
UR Code 174366| MPN PEX1S952LP£38.64Availability: In Stock
-
StarTech.com 1 Port PCI Parallel Adapter Card- Supports EPP
- ECP
- SPP and BPP
- Standard and low profile bracket included
- Data transfer rates of up to 1.5 Mbps
UR Code 174681| MPN PCI1PECP£22.86Availability: In Stock
-
StarTech.com 1 Port Low Profile PCI Parallel Adapter Card- Compatible with low profile systems
- Supports EPP
- ECP
- SPP and BPP
- IRQ sharing eliminates conflicts between multiple cards
UR Code 174760| MPN PCI1P_LP£23.32Availability: In Stock
-
StarTech.com Raspberry Pi Board – USB 2.0 480Mbps – USB to M.2 SATA Converter – USB to SATA Raspberry Pi SSD- Connect an M.2 SATA drive to your development board to increase data storage capacity
- USB to M.2 SATA converter for Raspberry Pi and development boards includes USB cable and mounting accessories for Raspberry Pi board
- Supports M.2 SATA drives (including 2230, 2242, 2260 and 2280 drive heights) and supports USB 2.0 with data transfer speeds up to 480Mbps
- OS independent for easy set-up with no device driver installation required
- M.2 SATA Raspberry Pi Adapter / Raspberry Pi board converter / M.2 NGFF SATA SSD adapter for Raspberry Pi board / USB 2.0 to M.2 SATA drive converter for dev boards / USB to SATA M.2 adapter for dev board / Raspberry Pi board adapter / Raspberry Pi SATA M. 2 adapter / Raspberry Pi USB to M.2 SATA adapter / M.2 to USB adapter / Raspberry Pi USB 2.0 adapter
UR Code 240264| MPN PIB2M21£24.98Availability: In Stock
-
StarTech.com PIB2MS1 USB to mSATA Converter for Raspberry Pi and Development Boards - Red- Connect an mSATA drive to your development board to add increased data storage capacity
- USB to mSATA converter for Raspberry Pi & development boards
- USB to mini SATA Adapter for Raspberry Pi / Supports SATA I, II & III mSATA SSD Drives
- Includes USB cable and mounting accessories for Raspberry Pi
- Dev board mini-SATA adapter lets you connect an mSATA SSD directly through your dev board's USB-A port
UR Code 240265| MPN PIB2MS1£21.98Availability: In Stock